Current clamp TP-CC600

The Current clamp TP-CC600 is a current clamp that will allow your oscilloscope to measure electrical currents up to 600 A AC/DC, with a frequency response up to 400 Hz. When measuring with this current clamp, there is no need to break a closed circuit or to affect the isolation.

The wide jaws allow performing measurements on thick conductors.

For measuring DC current, a simple to operate zero adjust button is available.
Manufacturer: TiePie Engineering
Availability: In stock
Delivery date: 1-2 days
£76.00 excl tax
 
 
 
 

The table below shows detailed specifications of the Current clamp TP-CC600.

Electrical

Bandwidth DC to 400 Hz (-3dB)
Effective measurement range  
200 A range output 1 mV/A, 1 V = 1000 A
600 A range output 0.1 mV/A, 1 V = 10000 A
Accuracy  
DC 200 A range ±(3% ± 0.6 A)
DC 600 A range ±(3.5% ± 3 A)
AC 200 A range ±(3.5% ± 0.4 A)
AC 600 A range ±(4% ± 4 A)
Output connection 2 shrouded 4 mm banana sockets
 

Dimensions

Captured conductor size 30 mm maximum
Weight 240 g
Height 30 mm (1.2 inch)
Length 209 mm (8.2 inch)
Width 43 mm (1.7 inch)
 

Power Requirements

Power indicator Red LED
Battery type Standard 9 V IEC 6F22 cell
Low battery indication Red LED
 

Ambient

Operating Temperature 0 to 50 °C
Relative Humidity 25 to 70%
Storage Temperature -20 to 60 °C
Relative Humidity 25 to 80%
 

Certifications and Compliances

CE mark compliance Yes
RoHS Yes

The Current clamp TP-CC600 is delivered with:

AmountItem
1 Current clamp TP-CC600