Current clamp TP-CC400

The Current clamp TP-CC400 is a current clamp that will allow your oscilloscope to measure electrical currents up to 400 A AC/DC. When measuring with this current clamp, there is no need to break a closed circuit or to affect the isolation.

The wide jaws allow performing measurements on thick conductors.

For measuring DC current, a simple to operate zero adjust button is available.
Manufacturer: TiePie Engineering
Availability: In stock
Delivery date: 1-2 days
£84.00 excl tax
 
 
 
 

Electrical

Bandwidth DC to 20 kHz (-3dB)
Effective measurement range  
40 A range output 10 mV/A, 1 V = 100 A
400 A range output 1 mV/A, 1 V = 1000 A
Accuracy  
DC 40 A range ±(3.5% + 6 digits) (0 - 20 A)
±(4% + 10 digits) (20 A - 40 A)
DC 400 A range ±(3.5% + 6 digits) (0 - 300 A)
±(4.5% + 6 digits) (300 A - 400 A)
AC 40 A range ±(4% + 10 digits) (0 - 20 A)
±(5% + 10 digits) (20 A - 40 A)
AC 400 A range ±(4.5% + 10 digits) (0 - 300 A)
±(5% + 10 digits) (300 A - 400 A)
Output connection cable with 2 shrouded 4 mm female banana sockets
 

Dimensions

Captured conductor size 20 mm maximum
Weight 240 g
Height 38 mm (1.5 inch)
Length 190 mm (7.5 inch)
Width 70 mm (2.8 inch)
Length of cable 30 cm (11.8 inch)
 

Power Requirements

Power indicator Green LED
Battery type Standard 9 V IEC 6F22 cell
Battery life 80 hours typical with alkaline
Low battery indication Red LED
 

Ambient

Operating Temperature 0 to 50 °C
Relative Humidity 25 to 70%
Storage Temperature -20 to 70 °C
Relative Humidity 25 to 80%
 

Certifications and Compliances

CE mark compliance Yes
RoHS Yes

The Current clamp TP-CC400 is delivered with:

AmountItem
1 Carrying case
1 Current clamp TP-CC400