Sorry - this product is no longer available

CarScope i-Tester

The Carscope i-Tester is a stand alone, easy to use relative compression tester. Within minutes you can carry out a relative compression test on most 12 Volt petrol and diesel vehicles.
Availability: Available in 2 week
SKU: AD-ITESTER
Free shipping
£199.00 excl tax
Relative compression test
 
This test is only a comparison between cylinders so we can use this method to "see" if we have a cylinder (s) with low compression by comparing one cylinder to the next. Hence the term "relative".
 
Relative compression is the fastest, simplest way to find a low compression cylinder. This test has previously been available only on large and expensive diagnostic systems, requiring a laptop and an oscilloscope. Now it is easier than ever — with the new CarScope i-Tester that combines both functions - relative compression test and automatic waveform analysis. So, the final results are displayed in an easy to understand format.
 
You do not have to check each individual cylinder, all cylinders can be tested in one go. CarScope i-Tester works on 3, 4, 5, 6, 8, 10, 12-cylinder cars, 4 stroke, diesel and gasoline engines, DIS, conventional and Coil-on-Plug systems, and 12V electrical systems.
Relative compression test
 
This test is only a comparison between cylinders so we can use this method to "see" if we have a cylinder (s) with low compression by comparing one cylinder to the next. Hence the term "relative".
 
Relative compression is the fastest, simplest way to find a low compression cylinder. This test has previously been available only on large and expensive diagnostic systems, requiring a laptop and an oscilloscope. Now it is easier than ever — with the new CarScope i-Tester that combines both functions - relative compression test and automatic waveform analysis. So, the final results are displayed in an easy to understand format.
 
You do not have to check each individual cylinder, all cylinders can be tested in one go. CarScope i-Tester works on 3, 4, 5, 6, 8, 10, 12-cylinder cars, 4 stroke, diesel and gasoline engines, DIS, conventional and Coil-on-Plug systems, and 12V electrical systems.
General Specifications
Functional on the following Engine Types:

Number of Cylinders

3, 4, 5, 6, 8, 10, 12

Engine Stroke  

4 stroke

Fuel Types

Gasoline, Diesel

Ignition Systems

Conventional, DIS, Coil-on-Plug

Electrical System Voltage

12V

Power Supply

10V to 18V, 4 W typical

Relative Compression

0 to -100% contribution

 

Display

Type

TFT LCD Module

Size

2.4" diagonal

Resolution

320 x 240 pixels

Backlight

4chip white LED in Parallel 

High Brightness

150 cd/m2

 

Real time clock battery                                              
CR2032, 210 mA/h - save time for up three years without external supply 
                                    
Included Memory Card                
4 GB micro SDHC   
Main set:
  • CarScope i-Tester main device
  • Power supply cable
  • Universal probe
  • micro SD memory card

Optional accessories (not included in the main set):

  • Inductive pick-up clamp;
  • 10:1 attenuator adapter;
  • Automotive needle probe set;
  • AC/DC Current Clamp CA-60;
  • AC/DC Current Clamp CA-600