Sorry - this product is no longer available

Autosim Automotive Sensor Simulator

AutoSim is a smart testing device with power-on self-test. It is mainly used to simulate the output signal from automotive sensors: frequency, voltage, and O2 sensor signal. The users can enjoy great convenience provided by its user-friendly interface and fault tolerance design.
Availability: Available in 2 week
SKU: AD-Autosim
Free shipping
£129.99 excl tax
  • Hand-held sensor simulator tester;
  • Works independently or with any scan tool or oscilloscope;
  • Eliminate unnecessary replacement of non-defective sensors;
  • Sensor simulation: voltage, frequency, O2 sensor signal;
  • Trigger output impulse;
  • Digital LCD display shows actual output of signals;
  • Matrix LCD screen with backlight;
  • Output short circuit current protection;
  • Anti-dirt film keyboard;

 

  • Simulates actual working condition of the most automotive sensors;
  • Simulates O2 sensor signal;
  • Checking of basic ECU operation;
  • Controlling the output signal allows to check the ECU response and operation;
  • It can drive ECU into “open” or “closed” loop;
  • Activation of some actuators;

 

Voltage simulation range 0.1V ~ 12V
Frequency simulation range 0.1Hz ~ 10KHz
Trigger pulse output up to 0.15 amperes maximum
Output amplitude 0.2V to 12V output amplitude can be selected at each mode
Output short circuit current protection ± 150 mA
Power 12V DC (auto battery typical)
Power supply range 9V DC ~ 40V DC maximum
Power connector 2.5mm DC Plug
Quiescent power current ≤160mA
Ambient temperature -5°C ~ +50°C
Ambient humidity 0%RH ~ 85%RH
Dimensions 195mm x 100mm x 40mm
Weight 400g
  • Hand-held sensor simulator tester;
  • Works independently or with any scan tool or oscilloscope;
  • Eliminate unnecessary replacement of non-defective sensors;
  • Sensor simulation: voltage, frequency, O2 sensor signal;
  • Trigger output impulse;
  • Digital LCD display shows actual output of signals;
  • Matrix LCD screen with backlight;
  • Output short circuit current protection;
  • Anti-dirt film keyboard;

 

  • Simulates actual working condition of the most automotive sensors;
  • Simulates O2 sensor signal;
  • Checking of basic ECU operation;
  • Controlling the output signal allows to check the ECU response and operation;
  • It can drive ECU into “open” or “closed” loop;
  • Activation of some actuators;

 

Voltage simulation range 0.1V ~ 12V
Frequency simulation range 0.1Hz ~ 10KHz
Trigger pulse output up to 0.15 amperes maximum
Output amplitude 0.2V to 12V output amplitude can be selected at each mode
Output short circuit current protection ± 150 mA
Power 12V DC (auto battery typical)
Power supply range 9V DC ~ 40V DC maximum
Power connector 2.5mm DC Plug
Quiescent power current ≤160mA
Ambient temperature -5°C ~ +50°C
Ambient humidity 0%RH ~ 85%RH
Dimensions 195mm x 100mm x 40mm
Weight 400g
Voltage simulation range 0.1V ~ 12V
Frequency simulation range 0.1Hz ~ 10KHz
Trigger pulse output up to 0.15 amperes maximum
Output amplitude 0.2V to 12V output amplitude can be selected at each mode
Output short circuit current protection ± 150 mA
Power 12V DC (auto battery typical)
Power supply range 9V DC ~ 40V DC maximum
Power connector 2.5mm DC Plug
Quiescent power current ≤160mA
Ambient temperature -5°C ~ +50°C
Ambient humidity 0%RH ~ 85%RH
Dimensions 195mm x 100mm x 40mm
Weight 400g